Setting Video Capture to SVideo with VLC Media Player
ITpipes Mobile assumes using a Composite connection and does not have the option in config to switch to SVideo. If you need to switch for a Mobile user, VLC can be used to do so.
Open VLC, and go to Media -> Open Capture Device... as you would normally do when opening the stream in VLC.
Set the recording devices as usual, and then select the Advanced Properties... button. Check the two boxes labeled Device Properties and Tuner Properties.
Before displaying the stream, it will give you a few extra prompts. The defaults here should be fine until you get to a Properties window with a Crossbar tab. Here, for the Video in, switch the option from Composite to SVideo and continue through the prompts.
If a feed is coming through SVideo, it should be showing in VLC at this point. This will automatically adjust the default in Windows, and from this point on Mobile should be able to see it. Make sure to test the video feed in Mobile by closing VLC first and then checking the Video Settings window.
Video Conversion - Converting videos from other formats into an ITpipes Web format
Video Conversion If you are converting a large amount of media, ITpipes has built an in-house a multi-processor usage application that quickly converts video. We run these simultaneously on several powerful systems and its rare that any project has ...
ITpipes Mobile - Import an Existing Video
How do I import an existing video and create inspections with an observation? The instructions below will show you how to do this using ITpipes Mobile. An inspection will need to exist when importing a video. To create an inspection: Select to start ...
How to check if a video file is MP4/H264?
ITpipes uses MP4 with an H264 codec. To identify the video file format, a video player software is required. A good option is VLC player, link here. To confirm the files is MP4: 1) Select the video file on your computer. 2) Right click on the ...
ITpipes Web - import an existing video
How do I import an existing video and create inspections with an observation? The instructions below will show you how to do this using ITpipes Web. Adding an asset To add an asset, select , located below the toolbar. Adding an inspection To add an ...
ITpipes PC Hardware & CCTV Camera Requirements
ITpipes Hardware Compatibility Current PC/computer hardware and CCTV camera hardware requirements are available on this link, by selecting Compatibility and PC requirements. If computer hardware does not meet specifications, ITpipes can not install ...